cold laminator user manual.
follows is information of cold laminator user manual.
cold Laminating machine is used cold process, the cold laminating film surface mounted installation with pictures , make pictures with corrosion, waterproof, anti-ultraviolet light erosion, can remain fresh , do not fade , non-yellowing , but will also make the picture longevity strong three-dimensional , improve picture artistic appeal. Widely used in modern wedding , art photography , computer printing and paintings, posters, advertising pictures, mounted equipment working document data. Laminating is an ideal tool for image processing post- production process , cold laminating machine is to complete this process .1, using the specification:
( 2 ) Maximum Frame format : 1300mm, 1600mm;
( 3 ) framed by the length : not limited ;
( 4 ) Maximum mounting thickness : 10mm ( common type ) ;
( 5 ) The machine is hand-cranked cold laminating , no power . Mounting pressure regulator :
The machine can adjust the mounting pressure of left and right ends ,respectively , equal to the pressure at both ends of the rubber roller . Should first separate the upper and lower two rubber rollers , rubber rollers and then cold laminating film on top, turn the knob , and to ensure that the upper and lower rubber roller parallel to let collide , and then a little pressure . Pressure is not too heavy to avoid mounted equipment in longevity bubbles.
2 Note that both sides of the regulator knob to position the empty way ! The first side of the first down after the other side of the knob must re-adjust knob down pressure ! Turn the knob clockwise to increase the pressure ; turning the knob counterclockwise to reduce pressure.
3, the parts of the structure :
Adjustable stand ( left, right ) ;
Table plate ( front, rear ) ;
Bade wheels and platen support legs ;
Cots ( upper and lower ) .
4 , accessories and maintenance :
When cleaning rubber roller , apply with a soft cloth dipped in alcohol or neutral detergent scrub , wipe clean with a dry cloth . Absolutely not
Allows the sheet metal and other hard materials.
Both sides of the screw to regularly refuel. When the machine rubber roller long time, should be immediately separated from the upper and lower rubber roller , rubber roller to prevent deformation due to long- time squeeze .
Cots prohibited in certain parts of the long-term rigid mounting material!
if you do not have a cold laminator , so follows are our cold laminator information
Manual cold laminator 1600
Manual control, Convenient operation, Favorable economy, Without power.
1838*452*361mm
Product introduction:
Manual control, Convenient operation, Favorable economy, Without power.
This model is easy to handle, no need professional training and widely using in printing making, exhibition industry, wedding photo & design fields etc.
Specification:
Working: Manual.
The most width: 1600mm.
The most thickness: 10mm.
The most length: unlimited.
The net weight of this machine: 120KG.
Exterior size: 1838*452*361mm.
