Cnc Marble stone engraving carving machine.

best cheap price CNC marble stone engraving carving machine is a best way to process control engraving machine carving run by computers.

follows we are tell you 4 of different way for engraving Marbles or Stone.and generates Best way for carving Marble or stone is Cnc router engraving machine.

1. traditional hand-carved.
Traditional hand-carved one day about two hundred small word can be engraved, slow, not standard.

2 marble etching solution.
Engraving etching solution of low cost, large engraving speed, mixed with hydrochloric acid-based etching marble calcium carbonate with a chemical reaction and precipitate soluble salts, and then washed with water to clean etched engraving effect, the disadvantage is only Chinese white marble and carved, engraved stone not the other

3 blasting engraving machine.
Low cost sandblast carving, carved thousand two centimeters cost only ten million small print speed, cut a 2 cm small print on the line a few seconds, the depth can be freely controlled engraving standards, simple operation, will computer typing (or by hand ) will be able to learn a few friends, the disadvantage is to be equipped with an air compressor computer +380 V + carving machine matching can be used, a full set of equipment offer eight thousand yuan, more suitable engraved tombstone, monument.

4 CNC engraving machine.
CNC engraving machine engraving tool generates process control engraving machine carving run by computers. By a three-axis CNC engraving machine engraving, high requirements for workers to operate, requiring stone surfaces must be smooth, error-free, stone surface curved, shaped carved or not, the advantage is carved standard, the disadvantage is the stone size is limited, not stone greater than engraving machine, high cost, the real practical one to thirty thousand yuan, repairs, high maintenance costs, more appropriate relief.