How To Setup Type 3 Software For Your Cnc Router?
How To Setup Type 3 Software For Your Cnc Router?
Before You Install Type3 Software ,Please go to Download Type3 Software.
After You download , Please check Follows To Know How to Setup Your Type 3 Software For Your Cnc Router, Cnc Cutting Machine, Cnc Engraving Machine.
CNC Router engraving cutting machine Type 3 Software Setting Method for all customer good work with CNC routers
Setup:
Setup:
Start : → Programs → select Thai color electronic publishing systems Monteiro sent to the desktop icon, open Monteiro → File → Settings → Printers → choose to install a new printer Monteiro 'Jetposter'3330 → → install a new printer as the default printer → Close → confirm.
To start the installation:
1, run the installation CD Type3V4200 program Setup, select "Next" or "Yes", until the installation is complete.
2, run CD crack1, click Apply to determine the decryption software, if you have "crack 2", please do the same operation.
3, Type3 default installation path is: C: \ Vision, if you want to change the installation path, change the drive letter name only, do not change the drive letter after the ": \ Vision", after the change the installation path, running crack1 decryption, must be modified to do the same, the same letter name change only, do not change ": \" default path after.
4, some versions of the CD crack is compressed, after decompression run. Some older versions of the CD-ROM does not crack file, locate the "EXE" folder in the CD-ROM, copy and paste to the Type3 installation directory to replace the original EXE.
5, in some versions of the operating system that will run with the installation of some software, such as Type3 "Setup" screen after stopping, and may pop up error log reports, then please delete the system font folder where non-system fonts the end of the software and then reinstall the font.
Type3 settings
After the initial installation Type3, woodpeckers DSP or ARM for each model, please set the following order, if you are using a Hdtaoye or Ncstudio each version control system, you do not have to set item 3 below.
1, open on the desktop or in a program Type3, open the "Settings machine", click on "add machine" before the "+" sign, then expand "CNC machine", find "Fanuc 16M/Fanuc 0M" and select, click "Join."
2, in the "Settings Interface" select "File" and OK.
3, open the "Settings machine" dialog box, first open the right of the "post-processor", find the following line in the word "after setting the processor," in: ...... HeadpcrSz0 = p HeadpcrSz1 = G91 G28 Y0 Z0 HeadpcrSz2 = t HeadpcrSz3 = M6 ......... these four lines of characters after the equal sign is amended as follows: ...... HeadpcrSz0 = 0
HeadpcrSz1 = 0 HeadpcrSz2 = 0 HeadpcrSz3 = 0 ...... confirmed modify and correct.
Back to "set the machine", the minimum and maximum respectively modify the "total size" under the following:
x Minimum:-20000.00mm Maximum: 20000.00mm
y Min:-20000.00mm Maximum: 20000.00mm
z Minimum:-10000.00mm Maximum: 10000.00mm
Units are in millimeters: mm, confirm and exit "Set the machine."
5, Type3 software to open, open the "Options", "Edit" under modified as follows:
(1), "Calculation Parameters", select the "path to" "artificial" under; check the "Auto melted."
(2) "page can be engraved" in which each of the width, height, depth, to format the size of the machine, such as RS1212 type, a width of 1200mm, a height of 1200mm, a depth of 110mm, the remainder is 0, the unit is mm: mm. OK.
6, open the "Change", "page can be carved," under which the depth of the width and height to make modifications as above, and the rest are 0.
7, Type3 do any graphic into the "CAM" create any tool paths, machine work. In the "machine work", the following modifications:
(1), open the "share", check "curve line" and the "Z security start bit" was changed to 1mm.
(2), in the "machine work" dialog, activate the "lock" symbol, click on "File", OK.
(3), modify the "machine work" parameter box center position is 5-10, this is the process of carrying knives height.
8 Save and close Type3, software set the end.
The above settings are Type3 after the initial installation must be set after the completion of each set do not need to use this setting, if the machine does not read the file appears engraving work or alarm error, please check the above settings are correct.
2, U disk work used when doing formatting, "File System" must choose "FAT", or it may not read the disk engraving machine work.
3, certain brands of CF card or U disk because of compatibility problems that may lead to the engraving machine does not work or read the disk crashes, replace the CF card or U disk other brands. Special Note
If the computer has already installed Type3, please uninstall Type3 original components, uninstall as follows:
Under WinXP or Win2000 operating system, open the "My Computer" - "Control Panel" - "Add / Remove Programs" in the "Currently installed programs", select Type3 Ver 4.2.00, click "Change / Remove (c) "and then select the required" Yes To All "and" Ok "to complete the deletion.
To start the installation:
1, run the installation CD Type3V4200 program Setup, select "Next" or "Yes", until the installation is complete.
2, run CD crack1, click Apply to determine the decryption software, if you have "crack 2", please do the same operation.
3, Type3 default installation path is: C: \ Vision, if you want to change the installation path, change the drive letter name only, do not change the drive letter after the ": \ Vision", after the change the installation path, running crack1 decryption, must be modified to do the same, the same letter name change only, do not change ": \" default path after.
4, some versions of the CD crack is compressed, after decompression run. Some older versions of the CD-ROM does not crack file, locate the "EXE" folder in the CD-ROM, copy and paste to the Type3 installation directory to replace the original EXE.
5, in some versions of the operating system that will run with the installation of some software, such as Type3 "Setup" screen after stopping, and may pop up error log reports, then please delete the system font folder where non-system fonts the end of the software and then reinstall the font.
Type3 settings
After the initial installation Type3, woodpeckers DSP or ARM for each model, please set the following order, if you are using a Hdtaoye or Ncstudio each version control system, you do not have to set item 3 below.
1, open on the desktop or in a program Type3, open the "Settings machine", click on "add machine" before the "+" sign, then expand "CNC machine", find "Fanuc 16M/Fanuc 0M" and select, click "Join."
2, in the "Settings Interface" select "File" and OK.
3, open the "Settings machine" dialog box, first open the right of the "post-processor", find the following line in the word "after setting the processor," in: ...... HeadpcrSz0 = p HeadpcrSz1 = G91 G28 Y0 Z0 HeadpcrSz2 = t HeadpcrSz3 = M6 ......... these four lines of characters after the equal sign is amended as follows: ...... HeadpcrSz0 = 0
HeadpcrSz1 = 0 HeadpcrSz2 = 0 HeadpcrSz3 = 0 ...... confirmed modify and correct.
Back to "set the machine", the minimum and maximum respectively modify the "total size" under the following:
x Minimum:-20000.00mm Maximum: 20000.00mm
y Min:-20000.00mm Maximum: 20000.00mm
z Minimum:-10000.00mm Maximum: 10000.00mm
Units are in millimeters: mm, confirm and exit "Set the machine."
5, Type3 software to open, open the "Options", "Edit" under modified as follows:
(1), "Calculation Parameters", select the "path to" "artificial" under; check the "Auto melted."
(2) "page can be engraved" in which each of the width, height, depth, to format the size of the machine, such as RS1212 type, a width of 1200mm, a height of 1200mm, a depth of 110mm, the remainder is 0, the unit is mm: mm. OK.
6, open the "Change", "page can be carved," under which the depth of the width and height to make modifications as above, and the rest are 0.
7, Type3 do any graphic into the "CAM" create any tool paths, machine work. In the "machine work", the following modifications:
(1), open the "share", check "curve line" and the "Z security start bit" was changed to 1mm.
(2), in the "machine work" dialog, activate the "lock" symbol, click on "File", OK.
(3), modify the "machine work" parameter box center position is 5-10, this is the process of carrying knives height.
8 Save and close Type3, software set the end.
The above settings are Type3 after the initial installation must be set after the completion of each set do not need to use this setting, if the machine does not read the file appears engraving work or alarm error, please check the above settings are correct.
2, U disk work used when doing formatting, "File System" must choose "FAT", or it may not read the disk engraving machine work.
3, certain brands of CF card or U disk because of compatibility problems that may lead to the engraving machine does not work or read the disk crashes, replace the CF card or U disk other brands. Special Note
If the computer has already installed Type3, please uninstall Type3 original components, uninstall as follows:
Under WinXP or Win2000 operating system, open the "My Computer" - "Control Panel" - "Add / Remove Programs" in the "Currently installed programs", select Type3 Ver 4.2.00, click "Change / Remove (c) "and then select the required" Yes To All "and" Ok "to complete the deletion.
