flatbed air sublimation heat transfer features Advantage
air sublimation heat transfer features Advantage.
Automatic heat press machine is widely used in various fields bronzing crafted a place in the field of advertising production. In this paper, we introduce a number of mainly small series introduces the basic features on automatic heat transfer machine and operating procedures, and take a look.
Automatic heat transfer machine basic characteristics:
1, the device overall structural stability, fixed table (Hot Stamping Stamping accurate), heating plate with running around the main type (motor drive), high precision, easily deformed, smooth running, low noise;
2, automatic control, stable and uniform pressure, pressure up 8kg/cm;
3, digital control systems, PID microcomputer control, high accuracy (0.5 ℃);
4, manual buttons and foot switch with manual, automatic with a time control, high efficiency;
5, the heating plate using thick special ultra-precision ray tube technology, can effectively ensure a balanced temperature peaceful setting. Fever board with micro-protection device, high safety performance.
6, countertops special treatment, sublimation, thermal transfer, hot stamping, foam, and other products.
Automatic heat transfer machine basic operating procedures:
1 Turn on the power switch, temperature, time, pressure was adjusted to the desired requirements;
2, when the temperature is reached, the setted product, turn the switch to "manual" position, try to confirm the product quality hot before switching recognition to the "auto" position production;
3, when switching to "manual" position production; hand-activated auto-up "automatically" fever downward pressure until the time is up, such as: stamping process found the wrong place, according to the "emergency stop" Abort hot pressure, when the switch to the "Auto" position, simply place the heating plate heating plate automatically pushed under pressure.
Automatic Heat Press Machine Maintenance Guide:
1, pressure: If the pressure is not enough or too much, adjustable pressure regulator on the gas cylinder to the (+) direction of increasing pressure, the (-) direction to reduce the pressure (please note whether the cylinder lubricants).
2, temperature: When the device is not a given temperature heating plate uneven heat or fever, you should check the thermostat and thermocouple circuit, such as: thermocouple off, there is a broken indicator light on the thermostat, replace thermoelectric even.
3, Time: When switching to "manual", the press "manual automatic" not under pressure, check the "Manual" switch, when the switch to "Auto", not under pressure when the platen in place, check the box micro switch contact point is in place, if not in place should be adjusted.
These are related to heat transfer machine on automatic introduction, we want to help. If you want to continue to learn more about other introductory heat transfer machine, please continue to focus on our portal advertising advertising equipment price channel.
