How to good cutting engraving Crystal PVC word

How to good cutting engraving Crystal PVC word.

find best way and good cutting and engraving Crystal word, PVC word by cnc router

Production process:
1, typesetting (graphics arranged in principle saving materials)

2-point cut in the layout calculations to generate tool paths.

3, modify the direction of the machine during processing (graphics processing helps smooth the edges, according to the material itself, in terms of quality, generally do not need reverse), according to the choice of material selected reverse, clockwise (PVC clockwise, acrylic inverse clockwise)

4 Notes!
① cut since the beginning of the two-dimensional contour of the outer contour of the original line output, with a hollow inner contour, crystal words with the outer contour, while walking down the line with the original line output. Cutting three-dimensional trajectory angle does not hook. If you do mosaic, mosaic path hook, (interval is generally 0.2)
② When the Z-axis machining in the end plate of the origin of the first surface, and then subtract the computer to set a good engraving depth.

③PVC, Teflon plate as the original file when processing images.
10mm acrylic cutting below
Spindle speed (18000-20000)
Engraving speed (400-800)
Movement speed (1500-2200) (speed depends on the distance between the processing speed graphics)

②10mm above acrylic cutting
Spindle speed (18000-24000)
Engraving speed (250-600)
Movement speed (1500-2200) (speed depends on the spacing between the processing speed graphics

③10mm following PVC cutting
Spindle speed (18000-24000)
Engraving speed (1000-1500)
Movement speed (1500-2200) (speed depends on the distance between the processing speed graphics)

④; 10mm PVC cut above
Spindle speed (18000-24000)
Engraving speed (800-1500)
Movement speed (1500-2200) (speed depends on the distance between the processing speed graphics)

Commonly used tool in three
1, flat knife (mainly used for engraving)

2, when the cutter (for word crystal, PVC cutting) Add / Edit tool, height H1 to 60

3, the center knife (for three-dimensional sculpture (3D engraving), edge down)

Note: 1, carving material thicker, to take maximum spindle speed, engraving speed to take lower.
2, the above parameters and operational experience, machine performance, tools, materials, etc. related to the above parameters are only for reference, it is recommended to practice the operator in accordance with the above parameter data, the formation of self data, ie the actual operating data.

~ Click Here To Check More Article Content Keyword !

Show more

Popular posts from this blog

Free Download Maintop Rip For DX5 DX7 XP600 Printer

Free English ArtCut 2009 Software Download

Free Download Type3 Software For Cnc Router 3D Designs

ThorX6 Software USB Driver Free Donwload For Metal Marking System

Download USB Driver For Dx7 Dx5 XP600 Printer