Printer suddenly stopped halfway solution
Printer suddenly stopped halfway solution .
When using PHOTOPRINT or MAINTOP software, inkjet, the spray to a sudden stop
part of the inkjet, but the software is still PHOTOPRINT or MAINTOP display is
output. This phenomenon may occur when you encounter the situation are: 1, the ongoing large-format inkjet;
2, for 8PASS sort of high-precision inkjet;
3, computing slower;
4, the computer's printer port transmission speed slower. Settlement proposals
computer's printer port is set to ECP Printer Port ECP Printer port support for inkjet printing than it does not support ECP Printer port much faster, so if the above-mentioned phenomenon, please check whether the computer settings to use the ECP printer port, if no settings, please click the following methods to set operations: for example, taking AWARD BIOS settings description methods: the hardware self-test on the computer, press DEL key to enter the CMOS settings, enter INTEGRATED PE-RIPHERALS Options will be one of the PARALLEL PORT MODE is set to ECP (Note: it must be a pure ECP, which can not be EPP, SPP or ECP / EPP), the last save and exit the BIOS settings, then the computer restarts, WINDOWS system will automatically detect the ECP print port and install the drivers for this time, you can use the ECP printer port provides a high-speed transmission performance. Use double-shielded IEEE 1284 cable ECP "recommended the use of non-essential goods) printed the length of the cable is too long, or are of poor quality will affect the accuracy of data transmission, so we recommend the use of length less than 2 meters in IEEE l284 double-shielded cable ECP. In addition, there inkjet interrupted, we should first check the printer cable connectors at both ends of whether there is loose, because, sometimes the machine at work in the process of vibration may cause loose wiring. Meanwhile, the replacement of others to ensure that a print can be used to replace cable testing is also a common and effective detection method. The computer's automatic power management feature is turned off due to time-consuming Inkjet longer, in the inkjet process, the majority of customers tend to let the computer automatically operation and output will not carry out other operations, if the power management feature is turned on, then the hard disk or the CPU will be automatically after a certain time to stop running, and this will form a transmission of information has already terminated, but the software displays the illusion is still transmitted.
Turn off the automatic power management approach is as follows:
1 to AWARD DIOS example to explain the settings in the CMOS method: the hardware self-test on the computer, press DEL key to enter the CMOS settings, enter POWER MANAGEMENT SETUP options. Will be one of the POWER MAN-AGEMENT set to DISABLE, then save and exit the BIOS settings.
2, in the WINDOWS98 system, turn off the automatic power management features do the following: "Start" "" Settings "" "Control Panel" "" Power Management ", will be one of the" Turn off hard disks "is set to" Never. " PHOTOPRINT or software to adjust some settings MAlNTOP please do the following: "Edit" "" Settings "" "Output Device" "" Settings "" "communications." Then "NOT SELECTED" adjusted value "120." Set the printer to extend the timeout. EDIT "Set" output device "set up" communication, the Transmission retry set to 100 minutes.
