Cnc Router Type 3 Software installation guide

Cnc Router Software Guide Installation For Type 3.

Type 3 is a high function Design Software for Cnc Routers. It Is easy to Creat 3D Model Carving File To All Type of Cnc Routers.
Now Follows are the type3 installation Steps. 

Put the disc in CD-ROM,(Or Download From Google).

Type 3 Software Guide

Here is also the page for Download Type 3 Software for Your Cnc Router.

open the "my computer" - CD - TYPE 3 V4200. Point SETUP - NEXT - YES, and then the continuous point "NEXT", this time the computer began to automatically install. Point FINISH waiting for the computer to restart.

Second step, decompression. My computer - select the CD, the point TYPE 3 V4200 crack1 - APPLY, and then determine; APPLY - crack2 - determination. Complete decompression process at this time.Then Connect Your Cnc Router Machine with Type 3 Software.

Third step, modified processor. First back to the desktop, point type 3 icon.
1, "join the machine" in front of the election "+"";
2, "CNC machine" in front of the election "+"";
3, choose "16M/Fanuc 0M Fanuc", make it become the green bottom;
4, click on the lower right corner of the "join", and then "confirm"".
1, select the "post processor......" ;
2, the drop-down scroll bar, the Nmax=999999 of the 9 "10" to 9 "6"";
3, the "P" in the "HeadpcrSz0=p" to "/ROC/""
HeadpcrSz1=G91. G28
HeadpcrSz2=t equals sign "=""
Delete behind HeadpcrSz3=M6.
4, the "17" to "05" in EndpcrSz0=M17";
5, the upper right corner of the confirmation".
1, the smallest X:-200.000mm changed to: -2000.00mm, Max: 200.000mm to: 2000.00mm.
2, the smallest Y:-200.000mm changed to: -2000.00mm, the maximum Y:200.000mm
Changed to: 2000.00mm.
3, minimum: -100.000mm to: -50.00mm, Max: 100.000mm to: 50.00mm.
And then confirm - exit (this time will automatically pop up the type3 interface).
Fourth step, change the page and options. According to their own models set, the depth of the same, the following to "RS-1208" as an example.

1, according to F10, modify the following parameters On Type 3 Software For Your Cnc Router Machine:
Universal - cancellation of the number of steps: 10 to 30, automatic save: 20 to 3; select the "sound": remove the hook;
Display - select "show relief" to remove the hook;
Page - width can be carved into 1200mm (L): 0mm Liubian left, right edge (R): 0mm
The height to 800mm (B): 0mm, the bottom left side of the top edge (T): 0mm, depth to 150mm, the top side: 0mm, bottom: 0mm;
The calculation parameters -- the choice of "artificial", as "the 2 election 0p1".
And then create a new page (the actual table control page of your engraving machine).

The fifth step: set the "Cnc machine works" parameters.
1, draw a box, enter the CAM module, create the tool path, into the machine work";
2, point the following lock, make it open;
3, point "file", so that it is selected;
4, the right side of the "share" - "curve of the line", select the tick. Z security start bit: 1.000mm to 0.000mm - confirmation"
5, point confirmation - implementation. And then close the type3, save it.
Note: the first time to open the U00 file, you must open the Notepad or tablet.

~ Click Here To Check More Article Content Keyword !

Show more

Popular posts from this blog

Free Download Maintop Rip For DX5 DX7 XP600 Printer

Free English ArtCut 2009 Software Download

Free Download Type3 Software For Cnc Router 3D Designs

ThorX6 Software USB Driver Free Donwload For Metal Marking System

Download USB Driver For Dx7 Dx5 XP600 Printer