Repair 750 850 Novajet lecai Large format printer

Solution For Large format printer Error"carriage Axis Failure". 

Failure Error:

The Novajet 750 Large format Printer Error Message on LCD display say :"carriage Axis Failure"
analysis For The Large format Printer Problem: 
1, the Printer belt pulley and the copper sleeve damage is made in the resistance is too large;
2, the Large format Printer Motor General Life is 1200 - 800 hours, the use of time beyond this range may cause damage to the motor.

Solution To Fix The Problem:
1, check the Problem belt wheel bearing rotation is normal, such as the bearing deformation or rotation is not smooth, the belt pulley damage;

2, remove the copper sleeve, clean and wipe and then try again;

3, first of all, "servo cycle" test, if the resistance value is increased or noise is too large, the motor is too long, need to change the new motor.

For More Common Failure Error On This Model Large format Printer, Try To Fix Problem On Follows Solution.
1. Internal ERROR shutdown Bad carriage paper sensor.

Solution: (The trolley board or the paper tester is not properly inserted and the contact is poor).

2. Internal ERROR shutdown Carriage Axis Failure.

Solution: (The motor is in poor contact and needs to be reinserted or the motor is damaged).

3. Internal ERROR shutdown CBLOLT 01RANGE LL:0

Solution: (The paper tester is not in good contact, you need to reinsert or replace the paper tester).

4. IMP assoservice: unexpected REQ.

Solution: (Poor contact or damage to the paper feed sensor) 

For More Installation Technical Support For This 750 Large format Printer.

1. How To Install this 750 850 Novajet lecai Large format printer Body,(Here).

2. How To Install The Print head For 750 850 Novajet lecai Large format printer,(Here).

3. How To Setup Software For This 750 850 Novajet lecai Large format printer,(Here).