How to install a new Chinese CO2 Laser machine?

Chinese CO2 Laser Machine Installation Guide.

Are you First Time to Operate a new CO2 Laser Cutting Machine?Do you know how to install it when you bought this machine?There are Setup And Installation Guide To Let you know!(Here is The Completed Video).

First, open the package of the Chinese CO2 Laser Machine and check whether the accessories are complete. Generally, there will be an installation CD, an encryption card, an instruction manual, a warranty card, a power cord, a data line, a water pump, and a smoke exhaust pipe. ventilator.
2. The Chinese CO2 Laser Machine should be lifted out of the package steadily, and it should not be carried out side by side, because the laser head is not bound, and other parts will be damaged after running to the head. Place it flat on the table.
3. Connect the data cable Of the Chinese CO2 Laser Machine. The power cable and the water pump. Pay attention to this place. The vertical machine should be the water inlet on the bottom and the water outlet on the top. It should not be reversed. It does not matter if the machine is placed flat. can,
4. Start connecting the exhaust pipe and the exhaust fan For the Chinese CO2 Laser Machine. First remove the small plastic sheet in the exhaust fan. Install it on the machine, connect the pipe, and tighten it with something. Stretch the exhaust pipe and put it outdoors.
5. Turn on the computer and install the driver. Put the CD into the CD-ROM drive and click Next, it is easy to install For Chinese CO2 Laser Machine.