Laser Marking Machine Hardware Parts Introduction.

Training Introduction For Laser Marking Machine Hardware Parts.

Training Courses can learn More about the hardware and equipment accessories of Fiber laser marking machine 

Today, the laser marking machine technicians will give you a brief introduction to the laser marking machine hardware and equipment parts. (Here is The Video To Introduce you laser marking machine inside all hardware).

1. Laser Marking Machine Hardware for Power Supplying System.

The laser power supply of fiber laser marking machine is a device that provides power for fiber laser, and its input voltage is AC220V. Installed in the marking machine control box.

2.Laser Marking Machine Inside Laser source.

Fiber laser marking machine adopts imported pulsed fiber laser, which has good output laser mode and long service life. It is designed to be installed in the casing of the marking machine.

3. The Laser Marking Machine Inside Hardware For Galvo scanning system.

The galvanometer scanning system is composed of two parts: optical scanner and servo control. The entire system is designed and manufactured with new technologies, new materials, new processes, and new working principles.

The optical scanner adopts a servo motor with moving magnetic deflection working mode. It has the advantages of large scanning angle, large peak torque, large load inertia, small electromechanical time constant, fast working speed, stability and reliability. The precision bearing anti-backlash mechanism provides super-bottom axial and radial runout errors; "electronic torsion bar" replaces the traditional elastic material torsion bar, which greatly improves the service life and long-term reliability; the working principle of zero power maintenance at any position is reduced The power consumption is reduced, the heating effect of the device is reduced, and the constant temperature device is omitted; the advanced high stability and precision position detection sensor technology provides high linearity, high resolution, high repeatability, and low drift performance.

4. The Laser Marking Machine Focusing system.

The function of the focusing system is to focus the parallel laser beam at one point. The f-θ lens is mainly used. The focal length of different f-θ lenses is different, and the marking effect and range are different. The fiber laser marking machine uses an imported high-performance focusing system. The standard lens focal length f=160mm, effective scanning The range is Φ110mm. The user can choose a lens according to the needs.