Chinese Top 1 Metal engraving machine With quality warranty.

Top One Metal Engraving Machine In china Machinery Market.

The metal engraving machine is a computer-controlled printing needle that moves on a certain trajectory in the X and Y two-dimensional planes, while the printing needle makes high-frequency impact motion under the action of compressed air.

In this way, a certain depth of Engraving is printed on the workpiece.

The main features of Metal engraving machine: 

it has a large depth, direct marking output through the computer, and the marking is neat and clear; the main typical applications: automobile and motorcycle parts, instruments, machinery, automobiles, signs and other industries.

Metal engraving machine quotation uses a sensor as a non-contact type travel switch, which has higher reliability and sensitivity. Printing needle: There are several types of printing needles: large, medium and small. Users can choose the type of needle according to the size of the character mark. Generally speaking, the printed character mark is small, and a smaller needle should be used. The needle adopts a single-piece structure, which can be removed or installed from the print head, and can be conveniently cleaned and lubricated frequently to keep the needle vibrating freely; the needle tip is made of high-hardness alloy steel, and the vibration amplitude is between 2~5MM , Not only can print on a variety of smooth and flat surfaces, but also on a variety of uneven blanks and round surfaces.（The Best Metal Engraving machine works video)

The control software should be reinstalled. Computer hardware or other soft failures. Have the computer repaired by professionals. The motor control drive board in the controller is damaged. The control drive board should be replaced. By inputting the marking content (Chinese and English characters, graphics, numbers, etc.) to be printed into the computer, the computer marking software converts the content into a digital control signal, transmits it to the controller, and drives the printing to print a continuous dot matrix on the workpiece Characters and graphics, the printing needle moves according to the set trajectory in the XYZ two-dimensional or three-dimensional plane or three-dimensional, while the printing needle makes high-frequency impact motion under the action of compressed air, thereby printing a dense dot matrix on the surface of the workpiece Concave mark