Easy To Find Problems and Repair Fiber Laser Machine?

Fiber Laser Marking Machine Problem analysis.

If You Want to Repair a Chinese Brand Fiber Laser Marking machine, Learn The machine Accessories Spare Parts is First thing you need to know. 

Because When you know All Accessories And Spare Parts , so you know how is a Fiber laser marking machine Works, so you can think in yourself to repair it.

Fiber Laser Marking Engraving Machine Inside has Many Spare Parts. And Important Is in follows.

1.Engine Of Fiber Laser
2.Galvanometer
3.Field lens
4.Industrial computer, monitor
5.Cabinet
6.Control switch, other power components.

Now Let us To see What Are Common Problems, And How to Solve it?

1. The marking pattern of the laser marking machine is partially unclear 
(1) Solution: Check whether the thickness of the molded plate is uniform, whether the molding pressure is too small, whether the temperature is too low, and whether the accuracy of the machine decreases.   

2. The marking pattern of the laser marking machine is dim and dull 
(1) Solution: Check whether the heating temperature is too low and whether the molding pressure drops.  

3. The logo pattern of the laser marking machine is whitish 
Solution: Check whether the molding speed is too slow and the molding temperature is too high.  

4. Marking film sticking plate for laser marking machine 
Cause: The hot pressing temperature is higher than the degradation temperature, and the increase in the viscosity of the coating will cause the plate to stick and the film will be wound on the holographic embossing roller. Solution: Lower the hot pressing temperature.  

5. The marking pattern of the laser marking machine is clear and fuzzy
Cause: The temperature distribution of the hot pressing device is uneven or the molded plate is uneven.