Cnc Machine Ncstudio Common Problem Solution
How To Find Problem Solution For Cnc Machine Ncstudio.
Ncstudio Software installation environment
Ncstudio is developed based on windows 32 environment, suitable for windows XP 32-bit / win 7 32-bit system;
Computer motherboard requires onboard PCI slot (desktop computer is recommended)
Ncstudio compatible main engraving and cutting file format
NC format:
Wentai, Jingdiao 5.19, artform, etc. directly output NC format; ENG format needs to be converted.
MMG format:
Generally it is a special format for ARTCAM software output, of course AC can also output NC.
Ncstudio Card Common Problem Solution
Ncstudio V5 version comes with PCI board driver, which can be loaded manually after installation or automatically loaded after restarting the computer.
1.4.1 "Software failed to start, it is strongly recommended to restart..." This prompt appears, the main reasons are as follows:
A. If the driver is lost, just reload the driver;
B. The control card is loose and the contact is poor, fix the board again;
C. Drive conflict: Mainly appear on the newly installed computer, check whether there is other software in the computer that triggers Ncstudio to be unable to open
D. Ncstudio Card Connector is oxidized, causing poor connecting.
Solutions For Cnc Machine Spindle is not run ！
1. Check in the software processing parameter setting to automatically stop the spindle when paused or finished.
2. Due to interference, the spindle button is disabled and the spindle cannot be stopped. Close the software directly and reopen the Ncstudio software.
Completed Training Courses For you Operate Ncstudio Control Software With Your Cnc Machine
The Best Cnc Router / Cutting Engraving Machine With Ncstudio V5 For Sales
Comments